TECHNICAL SPECIFICATION
three-phase AC synchro motor with external rotor coated magnets made on FeNdB basis winding impregnated high-temperature epoxy resin dual ball bearing with long life grease high speed ball bearing heat treated shaft parts produced on CNC machines recommended for the direct drive of the propeller high quality MP JET connectors 2,5 mm dia it is possible to buy conversion set for reversing mounting in case of reverse mounting the motor is fastened by four rubber silent-blocks
The packet of electromotor contains: 3 pcs of connectors (type F), 3 pcs shrinking isolations Recommend ESC: three-phase, sensorless (with EMF detection version), suitable version 40 Amps, 30 Amps partially.

Number of cells	6-10
RPM per Volt	950
Maximum recommend speed (min-1)	12000
Maximum speed (min-1)	14000
Maximum efficiency (%)	approx. 81
Current of maximum efficiency (A)	10-25
Short time currrent (A)	40
Internal resistance Ri ; (mW - miliohm)	34
Dimensions - diameter/length (mm)	36,5/48
Shaft diameter (mm)	5
Number of turns	7
Weight of drive unit (g)	170
Recommend propeller range	APC 9/5 - 14/5
Maximum weight of glider (g)	2000
Maximum weight of acrobatic model (g)	1500

Instruction Manual